Dyslexia and Blog posting

I have dyslexia and while it is often considered a liability, I have never found it so, in fact it makes my life easier, you’re better at maths, you’re better at logical puzzles etc etc

However it does still bite me a little bit when I’m writing blog posts, I simply don’t see works that are just a little wrong, I don’t see where sentences don’t make any sense. The traditional way of getting round this it’s to copy and paste the text you have just written into a new format then reread it but that takes time and often doesn’t work

Enter the latest in the internet age, half the time now for blog posts I simply dictate them and then go back and review them. Gone are the days of dictation software taking ages to learn your voice and making more mistakes than it is worth, this post itself was just done via a phone in a couple of minutes, but even with modern technology mistakes are made, things don’t work out or things simply don’t scan when I read them back, but there is an easy fix, purely by accident I bumped into Amazon Polly. I just thought it was as a cool little WordPress plugin that converted all of your blog posts to speech, but now I’m the main user of it, whenever I do a blog post before publishing it I simply preview it and get Amazon Polly to read it back, it’s amazing how much that clears up bad words bad phrases and non existent punctuation

Give it a try and see what I mean 

 

 

The best USB-C hub

As just about all computers now use USB-C as their main port, most of the historic Laptop docks have been replaced by generic USB -C hubs, in fact a proper dock is rare to see, and for the majority of the time these turn out to be rubbish in my opinion.

I have tried loads of them and they all have their own failings, be it bad pass through on the power or poor organisation of ports, some are even missing commonly used ports, but the worst offence to me is the fact that nearly all of them seems to insist on a hardwired USB-C Cable to attach them to your Machine, often only 6 inches long meaning you can never place the hub in a nice orderly place for all the cables that need to attach to it.

An otherwise good UBS-C hub ruined.

Thankfully I found one that gets over all of these issues, say hello to the StayGo USB-C Hub,  it looks just like the normal run of the mill dock but this one allows you to have your own USB-C cable, even though it does contain its own built-in short travel cable.

It’s made of metal therefore it has a little bit more weight to it and has nice rubber feet to stop it slipping, this combined with a nice layout and the full complement of needed ports means this is now my go to hub, why don’t more people design stuff like this.

 

 

 

 

Noddy Encode SQL

Sometimes you want to scramble or anonymise data in a table , mainly so you can reuse or use ‘real’ data without having real names or details showing, and don’t want to screw up the formatting, so things like emails and phone numbers don’t break as well, as only doing it to certain fields

Yes I know this is a naff way to do it but given the shear number of dbas that do it this way I figured it was worth posting, also note that dont just use this as it is, move some of the replacement values around to give it your own unique values.

UPDATE **table_name** t

SET t.**field_you_want_to_update** = REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(

REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(

REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(

t.**field_you_want_to_update

, ‘a’, ‘g’), ‘b’, ‘w’), ‘c’, ‘c’), ‘d’, ‘x’), ‘e’, ‘f’), ‘f’, ‘v’), ‘g’, ‘b’), ‘h’, ‘y’), ‘i’, ‘m’), ‘j’, ‘u’), ‘k’, ‘e’), ‘l’, ‘p’), ‘m’, ‘l’), ‘n’, ‘a’), ‘o’, ‘t’), ‘p’, ‘z’)

, ‘q’, ‘d’), ‘r’, ‘h’), ‘s’, ‘k’), ‘t’, ‘n’), ‘u’, ‘s’), ‘v’, ‘o’), ‘w’, ‘i’), ‘x’, ‘q’), ‘y’, ‘r’), ‘z’, ‘j’), ‘A’, ‘G’), ‘B’, ‘I’), ‘C’, ‘H’), ‘D’, ‘M’), ‘E’, ‘A’), ‘F’, ‘Z’)

, ‘G’, ‘Y’), ‘H’, ‘L’), ‘I’, ‘B’), ‘J’, ‘K’), ‘K’, ‘J’), ‘L’, ‘N’), ‘M’, ‘C’), ‘N’, ‘T’), ‘O’, ‘R’), ‘P’, ‘S’), ‘Q’, ‘X’), ‘R’, ‘D’), ‘S’, ‘W’), ‘T’, ‘E’), ‘U’, ‘F’), ‘V’, ‘F’)

, ‘W’, ‘P’), ‘X’, ‘U’), ‘Y’, ‘V’), ‘Z’, ‘Q’), ‘0’, ‘9’), ‘1’, ‘3’), ‘2’, ‘6’), ‘3’, ‘7’), ‘4’, ‘1’), ‘5’, ‘2’), ‘6’, ‘3’), ‘7’, ‘0’), ‘8’, ‘4’), ‘9’, ‘5’)

 

 

Painting Guide – Cursed City : Qulathis the Exile

Painter: Dultoriminis

Model(s): Character from Cursed City

Paint(s): Chaos Black (spray), Bugmans Glow, Cadian Fleshtone, Kislev Flesh, Rhinox hide, DoomBull Brown, Incubi Darkness, Deathworld Forest, Rakarth Flesh, Mephiston Red, Evil Sunz Scarlet, Retributor Armour, Reikland FleshShade, Morghast Bone, Agrax Earthshade, Zandri Dust, White Scar, Screaming Skull

Method(s):

  1. Base spray Chaos Black, paint face and hands Bugmans Glow, layer Cadian Fleshtone leaving all the recesses, highlight Kislev Flesh,
  2. Hair – base Morghast Bone, wash with Agrax Earthshade, for highlight mix Morghast Bone 1:1 with White Scar.
  3. Dark cloth – base Incubi Darkness, highlight with 1:1 mix of Incubi Darkness and White Scar.
  4. Leather/wood – base Rhinox hide, layer DoomBull Brown leaving the darkest parts.
  5. Leaves – base Deathworld Forest, wash Agrax Earthshade, highlight with 1:1 mix Deathworld Forest and White Scar.
  6. Fur – base Rakarth Flesh, wash Agrax Earthshade, highlight with Rakarth Flesh.
  7. Bone – base Zandri Dust, wash Agrax Earthshade, paint Screaming Skull only on the lower 1/3, wash Agrax Earthshade again only covering the top 2/3, wash again with Agrax Earthshade only covering the top 1/3.
  8. Arrow feathers – base Mephiston Red, highlight with Evil Sunz Scarlet.
  9. Gold – base Retributor Armour, wash with Reikland FleshShade.

Paint Time: 4-6 hours

 

Painting Guide – Cursed City : Brutogg Corpse-Eater

Painter: Dultoriminis

Model(s): Character from Cursed City

Paint(s): Chaos Black (spray), Leadbelcher, Stormhost Silver, Rhinox hide, DoomBull Brown, Tuskgor Fur, Bugmans Glow, Cadian Fleshtone, Kislev Flesh, Zandri Dust, Dark Reaper, Retributor Armour, Liberator Gold, Blood Angel Red, Reikland FleshShade, Nuln Oil, Agrax Earthshade, White Scar

Method(s):

  1. Base Coat – Spray Chaos Black,
  2. Flesh – base Bugmans Glow, wash Reikland FleshShade, paint Cadian Fleshtone but leave all darkest recesses and cracks, highlight most raised bits in Kislev Flesh.
  3. Cloth – base Dark Reaper, mix Dark Reaper with White Scar at a 2:1 ratio for highlights.
  4. Steel – base Leadbelcher, wash Nuln Oil, highlight Stormhost Silver.
  5. Leather – base Rhinox hide, wash Agrax Earthshade, paint 2/3 DoomBull Brown leaving the darkest bits, highlight Tuskgor Fur.
  6. Buckles and pauldron – base Retributor Armour, wash Agrax Earthshade, highlight Liberator Gold. For pauldron only, paint Blood Angel Red over the gold but being careful to leave the trim gold.
  7. Fur and rope – base Zandri Dust, wash Agrax Earthshade.

Paint Time: 4-6 hours