Painter: Dultoriminis

Model(s): Alluna the Illuminati Assassin

Paint(s): Chaos Black spray, Khorne Red, Mephiston Red, Evil Sunz Scarlet, Wild Rider Red, Naggaroth Night, Xereus Purple, Genestealer Purple, Mornfang Brown, Skrag Brown, Grey Knights Steel, Abaddon Black , Bugmans Glow, Reikland FleshShade, Cadian Fleshtone.

Method(s): base with Chaos Black spray,

Base the boots, gloves, hood and cape with Naggaroth Night, layer Xereus Purple avoiding the darkest recesses, finally highlight with Genestealer Purple.

For the main body and red flare on hood and cape, base the body only with Khorne Red, next layer Mephiston Red avoiding the dark recesses of the body. here you can pick out the tip of the hood and bit nearest the face with Mephiston Red also. for the hood blend we need to create a glaze, for this create a 3:1 water and Mephiston Red mix. paint this onto the purple of the hood just above (the part nearest face) or below (the tip of the hood) where you applied the red base and push your brush towards the red. the coverage will seem very minimal but that’s fine, we want to do several passes allowing time for it to fully dry between passes. this will create a nice smooth transition. Take your time and have fun with it.

Back to the body, with Evil Sunz Scarlet pick out the abs, top of the breasts and any other high creases in the suit. lastly a very fine highlight with Wild Rider Red.

Leather straps, base with Mornfang Brown, next layer 1:1 mix Mornfang Brown and Skrag Brown over all but the darkest recesses, finally highlight with Skrag Brown.

Lastly paint hair Abaddon Black, base face Bugmans Glow, wash Reikland FleshShade, and highlight Cadian Fleshtone. and pick out all metal bits with Grey Knights Steel.

Painter: Dultoriminis

Model(s): Chaos Lord

Paint(s): Chaos Black spray, Abaddon Black, Dawnstone, Dark Reaper, Retributor Armour, Reikland FleshShade, Scale Colour – Metal n’ Alchemy – White Alchemy, Iron Warriors, Leadbelcher, Nuln Oil, Averland Sunset, White Scar, Trollslayer Orange, Bugmans Glow, Cadian Fleshtone, Kislev Flesh, Druchi Violet, Zandri Dust, Agrax Earthshade, Ushabti Bone, Screaming Skull, Rhinox hide, DoomBull Brown, Mephiston Red, Carroburg Crimson.

Method(s): base with Chaos Black spray, like with other models, base again all over with Abaddon Black. highlight all armour plates around the trim with Dark Reaper.

for the gold trim base Retributor Armour, wash Reikland FleshShade, layer avoiding recesses with Retributor Armour, lastly apply a very fine highlight with Scale Colour – Metal n’ Alchemy – White Alchemy.

Flesh: base the face and all the fleshy tubes with Bugmans Glow, pick out eyes with white scar and teeth with Screaming Skull. apply a wash of Nuln Oil to the teeth only. paint pupils of eyes with Abaddon Black. apply a wash of Reikland FleshShade to all flesh parts including the face. next layer Cadian Fleshtone avoiding the dark recesses. highlight with Kislev Flesh. finally create a 1:1 mix of water and Druchi Violet and paint over all fleshy pipes and the lower part of the face in particular the sunken cheeks, this really helps give the grim dark evil look we want on a chaos warrior.

Steel Parts: base with Iron Warriors and highlight Leadbelcher.

Leather wrap: base Rhinox hide, and highlight with DoomBull Brown.

Weapon glow: base Averland Sunset, layer Trollslayer Orange and highlight White Scar.

Bone: base Zandri Dust, layer Ushabti Bone and highlight Screaming Skull

Hair and fur: base with Abaddon Black and dry brushed with Dawnstone.

Cape: base Mephiston Red, wash Carroburg Crimson and highlight with Mephiston Red.

Paint Time 8-10 hours

Painter: Dultoriminis

Model(s): Main Blackstone Fortress original box.

Paint(s): Grey Seers spray, Abaddon Black, Eshin Grey, Gryph-Charger Grey contrast, Grey Seers base paint, Mephiston Red, White Scar.

Method(s): Spray whole model with Grey Seers, paint legs with Abaddon Black, once fully dry dry brush with Eshin Grey.

Armour plates: apply Gryph-Charger Grey mixed 1:1 with water. once completely dry do a very light dry brush with Grey Seers base paint. lastly for the eye, base in Mephiston Red and apply a little flick of White Scar to bottom corner with a dot of white in the opposite top corner.

Paint Time: 30-45 mins

Painter: Dultoriminis

Model(s): Main Blackstone Fortress original box.

Paint(s): Leadbelcher spray, Nuln Oil, Agrax Earthshade, Celestra Grey, Ulthuan Grey, White Scar, Drakenhof NightShade, Mephiston Red, Retributor Armour, Averland Sunset, Yriel Yellow, Rhinox hide, Mornfang Brown, Skrag Brown

Method(s): Base coat all over with Leadbelcher, wash with Nuln Oil and then Agrax Earthshade once Nuln Oil is fully dry,

Armour plates: base with Celestra Grey, layer Ulthuan Grey, recess wash with Drakenhof NightShade, edge highlight with White Scar.

Lights: base Mephiston Red, add a few tiny dots of White Scar to mimic reflective shine. Or base Averland Sunset, layer Yriel Yellow leaving outermost edge and then add a dot of White Scar. (a mix of both is best)

OPTIONAL: Rust, For rust and grime pick out some small areas with Rhinox hide, less is more here as you can always add more later so start slow, I would also recommend going around any rivets first before doing drips. inside the Rhinox hide apply Mornfang Brown, covering about 2/3rds of the Rhinox hide. next add a few dots of Skrag Brown just to give it the slight rust ‘setting in’ look. and finally a small amount of White Scar highlight under any rust or scratches, this will give it that 3D effect.

Paint Time: 4-6 hours

Notes: Although this model looks easy from the guide I cannot stress enough the importance of taking your time with the “white armour plating” the key thing here is multiple very thin coats of Celestra Grey and Ulthuan Grey. take your time and be ready for 4 or 5 coats. While it may seem tedious it will be well worth it for the smooth finish on the white. no body wants lumpy plates.

Painter: Dultoriminis

Model(s): Cursed City Main Box

Paint(s): Wraithbone spray, Guilliman Flesh contrast, Magos Purple contrast, Gore-Grunta Fur contrast, Stegadon Scale Green, Pallid Wych Flesh.

Method(s): Spray basecoat of Wraithbone. For the skin use Guilliman Flesh, once fully dried, dry brush Pallid Wych Flesh lightly over all skin, then with a 1:1 mix of Magos Purple and water, wash over the hands and feet. Next apply Gore-Grunta Fur to all fur areas being careful not to get it on the skin. Lastly paint teeth and claws with Stegadon Scale Green.

Paint Time: 1-2 hours